Tree removal should never begin with “we will figure it out when we get there.” Large limbs, nearby roofs, fences, utility lines, soft ground, and limited access require a deliberate sequence. The NASELLO Tree Removal Method gives every job a clear quality plan—from the first look at the tree through the final walkthrough with the property owner.

N — Notice the tree and everything around it

The method begins by looking beyond the trunk. Nasello’s identifies the tree’s size, lean, visible defects, deadwood, storm damage, and relationship to the home, driveway, fences, landscaping, neighboring property, and overhead lines. The crew also considers what could change once weight begins coming out of the canopy.

This first step defines the real job. A tree in an open lot may allow a simple approach, while a similar tree beside a roof or pool may require rigging, lifting, or smaller controlled sections.

A — Assess access, equipment, and jobsite conditions

Before scheduling the work, the plan accounts for gate width, overhead clearance, equipment placement, soft or saturated soil, drainage, buried utilities, parked vehicles, and the route used to move debris. The goal is to bring the right equipment and avoid creating a new problem while solving the tree problem.

  • Choose safe locations for trucks, lifts, compact equipment, or a crane
  • Identify areas that need mats, plywood, or additional protection
  • Establish a clear path for branches, logs, and cleanup equipment
  • Address utility or emergency-service coordination when required

S — Sequence every cut before removal begins

A quality removal has an order. The crew determines which limbs come off first, how the canopy will be balanced as work progresses, where each section can travel, and how the trunk will be reduced. The sequence may change if hidden decay appears, but the team begins with a shared plan rather than improvising around the property.

The sequence is explained in plain language so the property owner understands the approach and the crew understands the objective.

E — Equip the crew and establish the safety zone

The crew matches protective equipment, climbing systems, ropes, rigging, saws, lifts, grapples, and communication methods to the job. Work areas are established before cutting begins, and people, pets, vehicles, and unnecessary traffic are kept outside the operating zone.

Safety is not a single checklist completed at arrival. Conditions are reviewed throughout the removal as weather, tree movement, equipment position, and material on the ground change.

L — Lower, lift, or place every section with control

The first L is about controlled handling. Depending on the tree and site, limbs may be lowered with ropes, lifted with crane assistance, held with specialized equipment, or placed into an approved open area. The chosen method should protect nearby structures and keep heavy wood from traveling where it should not.

Large sections are reduced to manageable sizes based on their weight, landing area, rigging capacity, and the equipment available to move them.

L — Leave the jobsite clean and ready

Cleanup is part of the removal plan—not an assumption added at the end. The agreed scope identifies whether brush and logs are chipped or hauled, whether usable wood remains, how hard surfaces are cleaned, and whether stump grinding is included or scheduled separately.

  • Process and remove debris included in the estimate
  • Clear driveways, walks, and agreed work areas
  • Discuss wood chips, logs, and stump work before departure
  • Review any expected settling or follow-up work

O — Owner walkthrough and satisfaction check

The final step is a walkthrough with the property owner or designated contact. Nasello’s compares the completed work with the approved scope, reviews the cleanup, answers questions, and identifies any follow-up item before the job is considered finished.

That final conversation closes the quality loop. The NASELLO Tree Removal Method is designed to give the customer a clear plan at the beginning, controlled work in the middle, and confidence in the finished job.

Use the method when comparing tree-removal companies

When reviewing estimates, ask every company for its action plan. Can they explain the tree, access, equipment, cutting sequence, property protection, debris handling, and final cleanup? Can they provide clear insurance information and a written scope?

A price without a method tells only part of the story. A quality plan shows how the company intends to protect the people, property, and expectations involved in the job.